※ "90*45 / 122*45 Clothes Rack" can collocate with cloth ※ "60*30-Pipe diameter 1.9cm"can't collocate with caster ※ "60*30- hollow screen" can collocate with caster
1. Take out the four lower tubes (with internal thread), adjust and turn the threads into the tubes clockwise respectively.
2. Take out two tablets and fix them on the same height of the position with the groove on iron tubes. (put the labeled "top" side and align with cannelures of tubes.
3. Take out one mesh piece, and embed the tubes in the four corners sequentially.
4. Upright the shelving. Measure the height of the second mesh piece then, and fix the tubes with tenon so that the mesh piece can be placed.
5. Fix the four upper tubes into the lower tubes respectively. Other mesh pieces placed extensively as step 4.
6. After making sure the height of each mesh piece, you can use wooden or rubber hammer to tap edges for making the layers more firmly.
7. Move the fabricated shelving to the appropriate position. If the shelving wasn't stable enough, please use bottom mat to adjustment.
Shelving maintenance
1. Please place all items equally on the shelving. When moving or cleaning shelving, remove items first.
2. To maintain the shelving, please use dry cloth to wipe or with a neutral detergent. Finally, just wipe dry shelving.